| Vickers PVB6-RSY-20-C-11 Piston Pump PVB | d:25.4 mm; Designation of bearing:UK306G2H-16; B1:38 mm; Adapter sleeve reference:H2306-16; N:23mm; s1:23 mm; G:M6x1; T min.:-20 °C; B:30 mm; L:90 mm; |
| Vickers PVB29-LSY-20-C-11 Piston Pump PVB | d:50 mm; Y2:2.79; e:0.36; b:7 mm; d2:63.8 mm; Mass:1.83 kg; Brand:SNR; Da max:99 mm; B:40 mm; Min operating temperature, Tmin:-40 °C; |
| Vickers PVB15-RS-31-C-11 Piston Pump PVB | Weight:17.23 kg; C0:108 kN; T max.:100 °C; Recommended tightening torque for set screw:54.5 Nm; A2:100 mm; H:385 mm; A1:36 mm; Designation of housing:FL318-; N:38mm; e:44 mm; |
| Vickers PVB20-LS-22-C-11-PRC Piston Pump PVB | Bearing Part Number:6003; Shape:Flange Type; Number of Bearings:Double; Volume Discount:Available; Flange Shape:Square Type; Seals:ZZ (Double Shield); Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; |
| Vickers PFB10-R-31-PRC Piston Pump PVB | T max.:100 °C; S:18.3 mm; B1:51.6 mm; s1:36.55 mm; A:36 mm; Designation of housing:F307-; N:19mm; Designation of bearing:EX307-22G2; A2:53.3 mm; B:38.1 mm; |
| Vickers PVB20-RS-20C-11 Piston Pump PVB | S:7.5 mm; Designation of housing:PP205-; T min.:-40 °C; d:23.81 mm; A1:21.6 mm; C0:7.88 kN; Recommended tightening torque for set screw:3.7 Nm; A:31.7 mm; H2:55.8 mm; H:28.6 mm; |
| Vickers PVB20-LS-20-CC-11-PRC Piston Pump PVB | Fatigue limit load, Cu:19.1 kN; d1:77.6 mm; E:100 mm; Mass (without HJ ring):1.1 kg; Manufacturer Name:NTN; D:110 mm; F:72 mm; Category:Bearings; Dynamic load, C:131 kN; ra max:1.5 mm; |
| Vickers PVB10RSY41C12 Piston Pump PVB | e:0.25; B:73 mm; Da max:256 mm; Characteristic inner ring frequency, BPFI:10.4 Hz; Y0:2.68; Brand:SNR; Mass:17.8 kg; k:7 mm; Dynamic load, C:1,080 kN; Min operating temperature, Tmin:-40 °C; |
| Vickers PVB29-LS-20-CM-11 Piston Pump PVB | Fatigue limit load, Cu:13.9 kN; Rating life coefficient, A2:1; Category:Bearings; Y2:1.8; Db min:101.5 mm; Cb min:4 mm; D:105 mm; Minimum Buy Quantity:N/A; ISO 355 reference:T2BC075; a:19 mm; |
| Vickers PVB29-RSY-20-CM Piston Pump PVB | Seal:Nitrile; d:85; Unit, Type:Insert Bearing Unit; Machining:No; Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Surface Treatment:No; Grease Type:Standard Grease; RoHS:6; Basic Load Rating, Dynamic Rating(N):96100; |