| Vickers 3520V30A8 1DC22R Vane Pump | Characteristic rolling element frequency, BSF:4.76 Hz; d:20 mm; Da max:38 mm; Fatigue limit load, Cu:0.23 kN; Max operating temperature, Tmax:110 °C; Characteristic cage frequency, FTF:0.4 Hz; da max:26 mm; rs min:0.6 mm; Radial clearance class:C3; Min operating temperature, Tmin:-25 °C; |
| Vickers 4520V42A5 1CC22R Vane Pump | A2:58.5 mm; G:M6x1; T max.:200 °C; T min.:-20 °C; Designation of closed end cover:SCC211; Designation of housing:FA211N-; H:219 mm; d:55 mm; B:45.3 mm; Dz:110 mm; |
| Vickers 3525V35A21 1AA22R Vane Pump | e:20 mm; N:14mm; d:35 mm; J:130 mm; A2:43.5 mm; Weight:1.12 kg; S:8.5 mm; H:155 mm; Designation of housing:FLE207-; G:R1/8"; |
| Vickers 45V60A 1D22R Vane Pump | Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:UC206G2; A1:30 mm; J:121 mm; T max.:100 °C; Weight:1.42 kg; S:15.9 mm; N:17mm; Designation of housing:P206-; N1:21 mm; |
| Vickers 4525V42A21 1BB22R Vane Pump | Designation of open end cover:SCOU212-39; L:241 mm; H2:138 mm; T max.:100 °C; G:M6x1; J:184 mm; Z:90 mm; N:20mm; A1:44 mm; B:53.7 mm; |
| Vickers 3520V38A8 1BB22R Vane Pump | Recommended tightening torque for set screw:8 Nm; Designation of bearing:UC207-22G2L3; Z:22.6 mm; N:M14; J:80 mm; L1:30 mm; H:47.6 mm; H1:13 mm; G:M6x1; A1:27 mm; |
| Vickers 45VQ60A 86C20 Vane Pump | L:143 mm; Recommended tightening torque for set screw:8 Nm; s1:33.4 mm; C0:23.2 kN; B:30.2 mm; Designation of housing:F210-; Weight:2.55 kg; B1:43.7 mm; S:11 mm; J:111 mm; |
| Vickers 35V30A 1A22R Vane Pump | N:M12; L1:35 mm; Designation of bearing:UC207-23G2L4; Designation of housing:PG207N-; S:17.5 mm; C0:15.2 kN; C:25.7 kN; E:22 mm; L:100 mm; Dz:80 mm; |
| Vickers 3525V30A21 1DD22R Vane Pump | Radial clearance class:CN; d:120 mm; Brand:NTN; ra max:2 mm; Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:6.59 Hz; D:180 mm; rs min:2 mm; Fatigue limit load, Cu:2.95 kN; Da max:171 mm; |
| Vickers 3520V35A11-1DD22R Vane Pump | s1:16 mm; Designation of bearing:US207-22G2; Recommended tightening torque for set screw:8 Nm; e:19 mm; G:M6x1; A1:14 mm; T min.:-20 °C; Designation of housing:FL207-; N:16mm; d:34.92 mm; |