| REXROTH 4WE6C7X/OFHG24N9K4 Valves | d:260 mm; Dynamic (Cr):12 mm; Static (Cor):22.3 mm; rs (min):5 mm; D:480 mm; with tapered bore:710 min-1; Grease:4430 kN; with cylindrical bore:600 min-1; Oil:364.860 kN; B:174 mm; |
| REXROTH S6A2.0 Valves | r3,4 min.:5 mm; d1 ≈:304.8 mm; d:220 mm; Mass angle ring:6.4 kg; B2:36 mm; B1:19 mm; |
| REXROTH 4WE6T6X/EG24N9K4/B10 Valves | d:50.000 mm; D:110.0000 mm; Basic Static Radial Load Rating Co:20000 N; Grease Speed Rating n1:5300 rpm; Oil Speed Rating n2:6300 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:63700 N; B:40.00 mm; |
| REXROTH DBW30B1-5X/200-6EG24N9K4/V Valves | D:160.0000 mm; Oil Speed Rating n2:4500 rpm; Oil Speed Rating Open/Shielded n2:4500 rpm; Basic Dynamic Radial Load Rating C:95600 N; Grease Speed Rating Open/Shielded n1:3800 rpm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3800 rpm; B:30.00 mm; d:90.000 mm; Sealed Speed Rating n3:2600 rpm; |
| REXROTH 4WMM6E5X/V Valves | H1:114.3 mm; Mass pillow block:39.5 kg; H:222.25 mm; P120°:52.5 kN; Da:180 mm; Bearing:23024 CCK/W33; da:107.95 mm; L:387.35 mm; Cap bolt:5/8-11 UNC; Eye bolt:2 x 3/8-16 UNC; |
| REXROTH DBE20-3X/50YG24N9K4 Valves | d3:180 mm; Lock nut:KMFE 28; d:140 mm; d1:125.412 mm; B:28 mm; Mass adapter sleeve assembly:3 kg; Hydraulic nut:HMV 28 E; B1:82 mm; G:M 140x2; |
| REXROTH 4WE6A6X/OFEW230N9K4/B10 Valves | Calculation factor e:0.68; Calculation factor f:1.06; Db max.:63.8 mm; Fatigue load limit Pu:0.305 kN; da min.:44.6 mm; B:15 mm; Calculation factor (single, tandem) Y2:0.87; Calculation factor fHC:1.01; da max.:49.1 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; |
| REXROTH ZDR6DP2-4X/75Y Valves | Mass lock nut:1.51 kg; B3:7 mm; h:5 mm; Associated spanner:TMFN 23-30; Axial static load carrying capacity:365 kN; B:28 mm; d3:165 mm; Recommended grub screw tightening torque:35 N·m; b:12 mm; d1:141 mm; |
| REXROTH 4WE6F7X/HG24N9K4 Valves | H:222.25 mm; End plug (suffix Y):EPR 14; H1:114.3 mm; Cap bolt recommended tightening torque:298.3 N·m; h:40.481 mm; A1:111.125 mm; Initial grease fill:181.44 g; N1:22.225 mm; J min.:295.275 mm; Stabilizing ring:2 x 38151-24; |
| REXROTH M-2SEW 6 P3X/630MG24N9K4 R900053182 Valves | Nut for removal:HM 31/800; d1:710 mm; B1:520 mm; Hydraulic nut:HMV 160 E; d:750 mm; G1:45 mm; G2:G 1/4; Mass withdrawal sleeve:248 kg; A:12 mm; G:Tr 800x7; |