| REXROTH S8A3.0 Valves | Lock nut:HM 3080; d:400 mm; B1:168 mm; d1:380 mm; B5:66 mm; G3:9 mm; G2:M 6; B:52 mm; A:4 mm; d3:470 mm; |
| REXROTH DBE30-3X/100YG24N9K4 Valves | r1,2 min.:4 mm; Mass bearing:600 kg; Calculation factor e:0.33; D1 ≈:716 mm; Design variant/feature:TQOSN/GWSI; Calculation factor Y2:3; Calculation factor Y0:2; D:771.525 mm; T:479.425 mm; Fatigue load limit Pu:1900 kN; |
| REXROTH DBW10B1-5X/315-6EG24N9K4/V Valves | Calculation factor Y2:2.9; Da max.:128 mm; Mass bearing + sleeve:4.1 kg; Basic dynamic load rating C:357 kN; da min.:73 mm; Limiting speed:5000 r/min; B2 ≈:64 mm; Calculation factor Y1:1.9; r1,2 min.:2.1 mm; B:48 mm; |
| REXROTH S10P30-1X Valves | Basic static load rating C0:33.5 kN; D:60 mm; Frictional moment:0.1 N·m; d2:26.7 mm; Mass bearing:0.42 kg; Static moment stiffness:65 N·m/mrad; d:15 mm; Angle between holes in outer ring (Pitch) α:60 °; N:6.8 mm; r1,2 min.:0.3 mm; |
| REXROTH S10P50-1X Valves | r1,2 min.:1.1 mm; d1:160 mm; d:110 mm; Mass shaft washer:0.88 kg; B:11.5 mm; |
| REXROTH ZDR6DP1-4X/210Y Valves | d:70.000 mm; Accessories:One Seal; B:42.00 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; Basic Static Radial Load Rating Co:104000 N; Grease Speed Rating Open/Shielded n1:3800 rpm; Basic Dynamic Radial Load Rating C:143000 N; Sealed Speed Rating n3:2600 rpm; D:180.0000 mm; Fillet Radius ra:2.50 mm; |
| REXROTH 4WE6R6X/EW230N9K4/B10 Valves | r, r1,2 min.:0.3 mm; F:45 mm; Mass inner ring:0.052 kg; d:40 mm; B:20.5 mm; |
| REXROTH 4WE10A3X/OFCW230N9K4 Valves | B2:25 mm; Mass angle ring:2.59 kg; r3,4 min.:4 mm; B1:15 mm; d1 ≈:221.8 mm; d:160 mm; |
| REXROTH 4WMM6D5X/V Valves | Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; D:95 mm; Specific static load factor K0:20 N/mm²; Mass bushing:1.27 kg; Tolerance housing:H7; d:80 mm; Tolerance shaft:h8; Permissible sliding velocity v min.:0.25 m/s; |
| REXROTH DBW10B2-5X/350-6EG24N9K4/V Valves | P90°:111 kN; PG:1/4 NPT; RG:1/2 NPT; Appropriate attachment bolt size G:0.75 in; Ca:82.804 mm; S:4.763 mm; Stabilizing ring:SR-24-20; P60°:185 kN; Initial grease fill:379.89 g; ba:57.944 mm; |