| REXROTH 4WE6U7X/HG24N9K4/V Valves | Calculation factor Y0:1.3; d1 ≈:218 mm; Basic dynamic load rating C:1140 kN; r3,4 min.:3.3 mm; Fatigue load limit Pu:240 kN; d:206.375 mm; Basic static load rating C0:2500 kN; Calculation factor Y2:2; r1,2 min.:0.6 mm; Mass bearing:32.1 kg; |
| REXROTH 3WE6B6X/EW230N9K4/B10 Valves | D:225.0000 mm; d:90.000 mm; Oil Speed Rating n2:3400 rpm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:2400 rpm; B:54.00 mm; Basic Static Radial Load Rating Co:200000 N; Basic Dynamic Radial Load Rating C:216000 N; Fillet Radius ra:3.00 mm; |
| REXROTH 4WE6W7X/HG24N9K4 Valves | C1:5.35 mm; Calculation factor f0:7.3; Basic static load rating C0:1.93 kN; Calculation factor fHC:1; B:9 mm; K:0.5 mm; Fatigue load limit Pu:0.08 kN; a:7.7 mm; Ball diameter Dw:4.762 mm; Attainable speed for grease lubrication:68000 r/min; |
| REXROTH 4WE6P7X/HG24N9K4/B10 Valves | H1:140 mm; End cover:ASNH 524-620 R; Lock washer:MB 20; A1:120 mm; N4 max.:8 mm; P120°:350 kN; P55°:790 kN; J6:378 mm; Eye bolt, size:2 x M 10; Locating ring:2 x FRB 19.5/215; |
| REXROTH DR10-2-5X/100YM Valves | Basic dynamic load rating C:315 kN; da max.:78 mm; Sealing solution:Triple-lip seals; Specific static load factor K0:500 N/mm²; Basic static load rating C0:1560 kN; b1:7.7 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; r1 min.:0.6 mm; C:40 mm; da min.:75.7 mm; |
| REXROTH 3WE6B7X/HG24N9K4/V Valves | D:200.0000 mm; Grease Speed Rating Open/Shielded n1:3200 rpm; d:130.000 mm; Sealed Speed Rating n3:2000 rpm; Basic Dynamic Radial Load Rating C:106000 N; Oil Speed Rating Open/Shielded n2:3800 rpm; Fillet Radius ra:2.00 mm; B:33.00 mm; Accessories:Two Seals & Snap-Rin; Basic Static Radial Load Rating Co:100000 N; |
| REXROTH S6A5.0 Valves | Mass shaft washer:1.27 kg; d1:150 mm; B:13.5 mm; r1,2 min.:1.5 mm; d:85 mm; |
| REXROTH 4WE6W6X/EW230N9K4/B10 Valves | A2:149.225 mm; Mass pillow block:21.5 kg; P150°:40.5 kN; P180°:49.8 kN; H:192.088 mm; J max.:295.275 mm; Stabilizing ring:2 x SR-1615; Initial grease fill:286.33 g; Housing:SAF 615; L:349.25 mm; |
| REXROTH 4WE6U7X/HG24N9K4/B10 Valves | l1 min.:132 mm; Mass rod end:10 kg; G:M 72x4; d:70 mm; C1 max.:43 mm; B:49 mm; d2 max.:162 mm; r1 min.:1 mm; α:6 °; Basic static load rating C0:490 kN; |
| REXROTH 4WE6P6X/EW230N9K4/V Valves | Recommended tightening torque for grub screw:4 N·m; Limiting speed:3800 r/min; End cover:ECW 206; Thread grub screw G2:1/4-28 UNF; J max.:128 mm; J min.:114 mm; H2:19 mm; Basic dynamic load rating C:19.5 kN; Recommended diameter for attachment bolts, inch G:0.5 in; d:30.163 mm; |