| REXROTH S10P05-1X Valves | da max.:404 mm; Basic dynamic load rating C:2750 kN; rb max.:1.5 mm; Calculation factor kr:0.34; ra max.:1.5 mm; F:409 mm; Fatigue load limit Pu:570 kN; Design variant/feature:NNUB.1/W33WI; Limiting speed:1300 r/min; d:370 mm; |
| REXROTH 4WE6F6X/EG24N9K4/B10 Valves | rs (min):5 mm; with cylindrical bore:530 min-1; D:520 mm; with tapered bore:670 min-1; Oil:524.650 kN; Grease:6710 kN; Pu:3280 kN; Dynamic (Cr):9 mm; Static (Cor):16.7 mm; B:180 mm; |
| REXROTH ZDR6DP2-4X/25Y Valves | J:92 mm; Basic static load rating C0:15.3 kN; A:34.5 mm; Hexagonal key size for grub screw N:3.969 mm; Housing:FY 507 M/VZ033; A5:22 mm; Recommended diameter for attachment bolts, mm G:12 mm; End cover:ECY 207; J6:106 mm; N:14 mm; |
| REXROTH ZDR6DP2-4X/210Y Valves | A1:120.65 mm; Max. speed for Taconite seal:625 r/min; Adapter sleeve assembly:SNW 3028x4.13/16; RG:1/2 NPT; H:257.175 mm; End plug (suffix Y):EPR 27; H1:133.35 mm; L:419.1 mm; Mass pillow block:61.2 kg; P60°:249 kN; |
| REXROTH 4WE6L7X/HG24N9K4/V Valves | B:36.00 mm; Basic Static Radial Load Rating Co:52000 N; D:80.0000 mm; Oil Speed Rating n2:7500 rpm; Basic Dynamic Radial Load Rating C:59200 N; Fillet Radius rb:0.60 mm; Fillet Radius ra:1.00 mm; d:40.000 mm; Grease Speed Rating n1:5600 rpm; |
| REXROTH 4WE6C7X/OFHG24N9K4/V Valves | Tolerance housing:H7; B1:1 mm; Coefficient of friction µ min.:0.06; B:17 mm; Specific static load factor K0:80 N/mm²; D1:23 mm; Coefficient of friction µ max.:0.15; d:15 mm; Tolerance shaft:h9; Permissible sliding velocity v min.:0 m/s; |
| REXROTH 4WE10A3X/OFCW230N9K4 Valves | B2:25 mm; Mass angle ring:2.59 kg; r3,4 min.:4 mm; B1:15 mm; d1 ≈:221.8 mm; d:160 mm; |
| REXROTH 4WE6F6X/EW230N9K4/B10 Valves | Mass inner ring:0.0052 kg; F:13 mm; B:12.5 mm; d:10 mm; r, r1,2 min.:0.3 mm; |
| REXROTH DBW10B1-5X/50-6EG24N9K4/V Valves | d:90 mm; d1:135 mm; r1,2 min.:1.1 mm; B:10.5 mm; Mass shaft washer:0.64 kg; |
| REXROTH 4WE6P6X/EW230N9K4/V Valves | Recommended tightening torque for grub screw:4 N·m; Limiting speed:3800 r/min; End cover:ECW 206; Thread grub screw G2:1/4-28 UNF; J max.:128 mm; J min.:114 mm; H2:19 mm; Basic dynamic load rating C:19.5 kN; Recommended diameter for attachment bolts, inch G:0.5 in; d:30.163 mm; |